Gantry-circular welding machine
A gantry frame and a 45° head that goes around the part
Drag to rotate the model; scroll or pinch to zoom.
What it is
The name comes from two features. Gantry for the frame: a bridge on two side posts travels along the table (Y), a carriage travels along the bridge (X), and a vertical slide (Z) with the head sits on it. Circular for the way it works: the laser head always stands at 45° and turns around the vertical C axis. The welding point lies on this axis, so it does not move when the head turns, like the point of a compass. The machine moves the point around a circle along X and Y, and C turns the head so that the beam always looks at the part from outside.
The 45° head is part of the machine, not an option.
Which welds it makes
- Fillet welds around standing parts that a vertical head cannot reach: bosses, nozzles, fittings, couplings on a pipe and on a flat part.
- Saddle welds on a pipe: the weld goes around, and Z follows the curve of the pipe.
- With a rotator: circular flange welds outside, and at an open end also inside.
Limitation. The 45° head takes room on the side, so neighbouring bosses must be at least ≈110–130 mm apart (depending on the boss height).
Flat welds that the beam reaches from above are easier on a coordinate machine.
Options
- Rotator (A axis): circular flange welds outside and inside.
- Computer vision: the camera finds the centre of every boss before welding.
Models
- Dayue gantry-circular machine, custom build: no series name, Dayue builds it to order.
Cases
- K-0004. Bosses and a flange on a pipe: manifold: saddle welds around bosses and a flange outside and inside.