Computer vision
Welding machine option: a camera finds the part before welding
What it does
Before welding, a CCD camera coaxial with the beam takes a picture of the part, finds reference points (a tube, a boss, an edge) and shifts the program to their actual position. It is an option: the machine also welds without it if the part sits in an accurate fixture.
When it is needed
- The part is not placed accurately, and a fixture for it would be expensive.
- Many identical welds, each with its own small offset: tubes in a sheet, bosses on a pipe.
Three kinds of vision in welding
| Kind | What it does | Sensor |
|---|---|---|
| Positioning and offset correction | Finds the part before welding and shifts the program | 2D CCD camera |
| Seam tracking | Guides the head along the real joint during welding | 3D laser line |
| Weld inspection | Checks the shape and defects of the weld after welding | Camera or 3D scanner |
Dayue offers the first kind.
Where it is used
- Coordinate machine, case K-0003: the camera finds every tube in the sheet.
- Gantry-circular machine, case K-0004: the camera finds the centre of every boss.
- Manufacturer: Dayue Laser.