Rotator (A axis)
Welding machine option: a chuck turns the pipe under a fixed head
What it does
A jaw chuck clamps the pipe at one end, a long pipe gets a roller support underneath. The head stands over the joint, the rotator makes one turn, and the weld is done. The rotator works together with the machine axes: while it stands still, the machine welds on the pipe with its own axes.
Which welds
- A circular flange or pipe joint weld outside.
- At an open end also inside, if the diameter allows: from ≈150–200 mm inside, the weld no deeper than ≈100 mm from the end, and only with an inclined head.
Where it is used
- Coordinate machine Dayue DY-FLW2000: the rotator with a tailstock is built in, for pipe butt joints and branches on a pipe.
- Gantry-circular machine, case K-0004: the flange on a manifold outside and inside.